Product Resources - (Sign in required for expanded results)
Brochures
Manuals
Certifications
Selection Guide
All Content
Legacy Products
Training
Connect With Us
Facebook44 Google+44 Twitter44 YouTube44 LinkedIn44 instagramlogo44

GT21 Model

(3/9/2017)
GT2000_PART_NO_EXAMPLEB2014

GOT2000 Series General Specifications

Model Number

GT27, GT25, GT23

GT21

Operating Ambient Temp. (*1)

0 to 55°C (*2)

0 to 55°C (horizontal installation), 0 to 50°C (vertical installation)

Storage Ambient Temperature

-20°C to 60°C

Operating Ambient Humidity

10 to 90%RH, no condensation

10 to 90%RH, no condensation (*2)

Storage Ambient Humidity

10 to 90%RH, no condensation

10 to 90%RH, no condensation (*2)

Vibration Resistance

Conforming to JIS B 3502 and IEC 61131-2

Frequency

Acceleration

Half Amplitude

Sweep Count

Under intermittent vibration

5 to 8.4Hz

-

3.5mm

10 times each in X, Y and Z directions

8.4 to 150Hz

9.8m/s²

-

Under continuous vibration

5 to 8.4Hz

-

1.75mm

-

8.4 to 150Hz

4.9m/s²

-

Impact Resistance

Compliant with JIS B 3502, IEC 61131-2 (147 m/s² (15G), 3 times each in X, Y and Z directions)

Operating Atmosphere (*6)

No greasy fumes, corrosive gas, flammable gas, excessive conductive dust, and direct sunlight (as well as at storage)

Operating Altitude (*3)

2000m (6562 ft) or less

Installation Location

Inside control panel

Overvoltage Category (*4)

II or less

Pollution Degree (*5)

2 or less

Cooling Method

Self-cooling

Grounding

Grounding with a ground resistance of 100Ω or less.
If impossible, connect the ground cable to the control panel.

Grounding with a ground resistance of 100Ω or less by using
a ground cable that has a cross-sectional area of 0.14 to
1.5 mm
² (single wire), 0.14 to 1.0 mm² (stranded wire), or 0.25 to 0.5 mm² (rod terminal with an insulation sleeve). If impossible, connect the ground cable to the control panel. (*7)

Notes:
1. The operating ambient temperature includes the temperature inside the enclosure of the control panel to which the GOT is installed.
2. (GT27, GT25) When any of the following units is mounted, the maximum operating ambient temperature must be 5 °C lower than the one described in the general specifications: multimedia unit (GT27-MMR-Z), MELSECNET/H communication unit (GT15-J71LP23-25, GT15-J71BR13), CC-Link communication unit (GT15-J61BT13)
(GT23, GT21)
If the ambient temperature exceeds 40°C, the absolute humidity must not exceed 90% RH at 40 °C.
3. Do not use or store the GOT under a pressure higher than the atmospheric pressure at altitude 0 m. Doing so may cause a malfunction. Air purging by applying pressure to the control panel may create clearance between the surface sheet and the touch panel. This may cause the touch panel to be not sensitive enough or the sheet to come off.
4. This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the machinery within the premises. Category II applies to equipment that is supplied with power from fixed facilities. The withstand surge voltage for the equipment with the rated voltage up to 300 V is 2500 V.
5. This indicates the occurrence rate of conductive material in an environment where a device is used. Pollution degree 2 indicates an environment where only non-conductive pollution occurs normally and a temporary conductivity caused by condensation shall be expected depending on the conditions.
6. (GT25, GT27 only) Some models have ANSI/ISA 12.12.01 approval for use in Class I, Division 2 (ANSI/ISA 12.12.01, C22.2 No.213-M1987) hazardous locations. For the details, please contact your local sales office.
7. 5 VDC type does not require grounding.

GT21 Base Units

Model Number

Screen Size

Resolution

Display Type

Frame Color

Power Supply

Stocked Item

GT2103-PMBD

3.8"

320 x 128 dots

TFT monochrome LCD

Black

24VDC

S

GT2103-PMBDS

S

GT2103-PMBDS2

S

GT2103-PMBLS

5VDC

S

GT2104-RTBD

4.3"

480 x 272 dots

TFT color LCD

24VDC

S

GT2105-QTBDS

5.7”

320 x 240 dots

TFT color LCD

S

GT2105-QMBDS

TFT monochrome LCD

S


GT21 Power Supply Specifications

Model Number

GT2103-PMBD

GT2103-PMBDS

GT2103-PMBDS2

GT2103-PMBLS

GT2104-RTBD

GT2105-QTBDS

GT2105-QMBDS

Input Power Supply Voltage

24VDC (+10%, -15%)

5 VDC (±5%), supplied from PLC

24VDC
(+10%, -15%)

24VDC (+10%, -15%)

Input Power Supply Frequency

-

Power Consumption

Maximum Load

2.6W or less

1.9W or less

2.2W or less

1.1W or less

4.4W or less

4.5W or less

2.9W or less

Stand Alone with Backlight Off

2.0W

1.3W

1.6W

0.7W

2.9W

2.2W or less

Inrush Current

30A or less (1ms, ambient temperature 25°C, maximum load)

-

18 A or less (2 ms, 25°C, at the maximum load)

27A or less (2ms, 25°C, at the maximum load)

Permissible Instantaneous Failure Time

Within 5ms

-

Within 5ms

Noise Resistance

Noise voltage 1000Vp-p, noise width 1μs by noise simulator with noise frequency 30 to 100Hz

Withstand Voltage

500VAC for 1 minute between power supply terminal and ground

-

500VAC for 1 minute between power supply terminal and ground

Insulation Resistance

500VDC across power supply terminals and earth,
10MΩ or more by an insulation resistance tester

-

500VDC across power supply terminals and earth, 10MΩ or more by an insulation resistance tester

10MΩ or more by insulation resistance tester


GT21 Panel Cut Dimensions

Screen Size

Model

A

B

Remarks

3.8"

GT2103

105 (4.14)

66 (2.60)

Same dimensions as GT1020

4.3"

GT2104

118 (4.65)

92 (3.63)

5.7"

GT2105

153 (6.03)

121 (4.77)

Same dimensions as GT1055-Q and GT1050-Q

GOT_Panel_CutoutGT21

GT21 Performance Specifications

Model Number

GT2105-QTBDS

GT2105-QMBDS

GT2104-RTBD

GT2103-PMBD

GT2103-PMBDS

GT2103-PMBDS2

GT2103-PMBLS

Display Section
(*1, *2)

Type

TFT Color LCD

TFT monochrome LCD

TFT Color LCD

TFT monochrome LCD

Screen Size

5.7"

4.3" widescreen

3.8"

Resolution (Dots)

320 x 240 dots

480 x 272 dots

320 x 128 dots

Display Size (W x H) mm

115 x 86 (4.53 x 3.39 inch)

95.0 x 53.8
(3.74 x 2.12 inch)

89.0 x 35.6 (3.51 x 1.41 inch)

Number of Characters

16-dot standard font: 20 chars x 15 lines (2-byte characters)
12-dot standard font: 26 chars x 20 lines (2-byte characters)

16-dot standard font: 30 char. x 17 lines (2-byte characters) /12-dot standard font: 40 char. x 22 lines (2-byte characters)

16-dot standard font: 20 chars. x 8 lines (2-byte)

12-dot standard font: 26 chars. x 10 lines (2-byte)

Display Colors

65536 colors

Monochrome (black/white) 32 shade grayscale

65536 colors

Monochrome (black/white) 32 shade grayscale

Intensity Adjustment

32-level adjustment

Backlight

Type

LED (Not replaceable)

5-color LED (white/green/pink/orange/red) (not replaceable)

Life (*4)

Approx. 65000 h (operating ambient temperature: 25°C, display intensity: 50%)

Approx. 50000 hours (Time for display intensity reaches 50% at ambient temperature of 25°C)

Touch Panel (*3)

Type

Analog resistive film

Key Size (Dots)

Minimum 2 x 2 dots (per key) (*9)

Simultaneous Press

Simultaneous press prohibited (only 1 point can be pressed) (*5)

Life

1 million times or more (operating force 0.98N or less)

Panel Color

Black

Memory

User Memory Capacity

Memory for storage (ROM): 9 MB

Memory for storage (ROM): 3MB

Life (No. of Writings)

100000 times

Built-in Interface

RS-232

1 channel Transmission speed: 115200, 57600, 38400, 19200, 9600, 4800 bps
Connector shape: D-sub 9-pin (male)

1 channel Transmission speed: 115200, 57600, 38400, 19200, 9600, 4800 bps Connector shape: 9-pin connector terminal block

-

1 channel Transmission speed: 115200, 57600, 38400, 19200, 9600, 4800 bps Connector shape: MINI-DIN 6-pin (female)

2 channels Transmission speed: 115200, 57600, 38400, 19200, 9600, 4800 bps Connector shape: 9-pin connector terminal block, MINI-DIN 6-pin (female)

-

RS-422/485

1 channel Transmission speed: 115200, 57600, 38400, 19200, 9600, 4800 bps Connector shape: D-sub 9-pin (female) Terminating resistor (*11): OPEN/
110 Ω/330 Ω (Switched with the terminating resistor setting switch)

1 channel Transmission speed: 115200, 57600, 38400, 19200, 9600, 4800 bps Connector shape: 9-pin connector terminal block

1 channel Transmission speed: 115200, 57600, 38400, 19200, 9600, 4800 bps Connector shape: 5-pin connector terminal block

1 channel Transmission speed: 115200, 57600, 38400, 19200, 9600, 4800 bps Connector shape: 9-pin connector terminal block

-

-

RS-422

-

-

1 channel Transmission speed: 115200, 57600, 38400, 19200, 9600, 4800 bps Connector shape: 9-pin connector terminal block

Ethernet

-

1 channel Data transfer method: 10BASE-T, 100BASE-TX
Connector shape: RJ-45 (modular jack)

-

USB (Device)

1 channel; Maximum transfer rate: Full-Speed 12 Mbps Connector shape: USB Mini-B

SD Card

1 channel, SDHC compliant (maximum 32 GB)

1 channel, SDHC compliant (maximum 32 GB) (*6)

-

Buzzer Output

Single tone (tone length adjustable)

Protective Construction

Outside the enclosure: IP67F (*7) Inside the enclosure: IP2X

Front: IP67F Inside control panel: IP2X (*7, *10)

External Dimensions
(W x H x D) mm (in)

164 x 135 x 55 (6.46 x 5.32 x 2.17)

128 x 102 x 40 (5.04 x 4.02 x 1.57)

113 x 74 x 32 (4.45 x 2.91 x 1.26)

113 x 74 x 27 (4.45 x 2.91 x 1.06) (*8)

113 x 74 x 27
(4.45 x 2.91 x 1.06)

Panel Cutout (W x H) mm (in)

153 x 121 (6.03 x 4.77)

118 x 92
(4.65 x 3.62)

105 x 66 (4.1 x 2.60)

Weight kg (lb)
(Excluding Mounting Brackets)

Approx. 0.7kg

0.4 (0.88)

0.2 (0.44)

0.18 (0.40)

Applicable Software Package

GT Works3 Version1.144A or later

GT Works3 Version1.122C or later

GT Works3 Version1.112S or later

GT Works3 Version1.119Z or later

Notes:
1. Due to characteristics of LCD panels, bright dots (always lit) and dark dots (never lit) may appear on the panel. Note that these phenomena are characteristics of LCD panels and does not mean the products are defective or damaged.
2. Flickering may occur due to vibration, shock, or the display colors.<
3. When a stylus is used, the touch panel has a life of 100 thousand touches. The stylus must satisfy the following specifications: • Material: polyacetal resin • Tip radius: 0.8 mm or more
4. To prevent the display section from burning in and lengthen the backlight life, enable the screen save function and turn off the backlight.
5. If you touch two points or more simultaneously on the touch panel, a touch switch near the touched points may operate unexpectedly. Do not touch two points or more simultaneously on the touch panel.
6. The SD memory card unit (GT21-03SDCD), sold separately, needs to be mounted.
7. Note that the structure does not guarantee protection in all users’ environments. The GOT may not be used in certain environments where it is subjected to splashing oil or chemicals for a long period of time or soaked in oil mist.
8. The dimension when the SD memory card unit (GT21-03SDCD) is mounted is (W x H x D) mm (inch) 113 x 74 x 32 (4.45 x 2.91 x 1.26).
9. The minimum size of a key that can be arranged. To ensure safe use of the product, the following settings are recommended: • Key size: 16 x 16 dots or larger
10. The suffix “F” of IP67F is a symbol that indicates protection rate against oil. It is described in the Appendix of Japanese Industrial Standard JIS C 0920.
11. Set the terminating resistor selector switch of the GOT in accordance with the connection type when adopting GOT multidrop connection.