fa_logo

Inverters-FREQROL-A800 Plus Series -FREQROL-A800 Plus for Automated warehouse-

Model configuration

img-mv-1-sm
  • Feature
  • Specification
  • Standards
  • Discontinued

Model configuration

Outline dimensions are the same as those of FR-A800 series inverters.
Some functions are restricted. (For details of parameters and differences with the FR-A800 series, refer to the Instruction Manual.)

●：Released model

  • *1Models can be alternatively indicated with the inverter rated current (SLD rating).
  • *2Specification differs by the type as follows.
  • *3Available for the 5.5K or higher.
  • *4For the 75K or higher inverter, or whenever a 75 kW or higher motor is used, always connect a DC reactor (FR-HEL), which is available as an option.
Type Monitor output Initial setting
Built-in
EMC
filter		 Control
logic		 Rated
frequency		 Pr.19
Base frequency voltage
FM
(terminal FM equipped model) 		Terminal FM: pulse train output
Terminal AM: analog voltage output (0 to ±10VDC) 		OFF Sink logic
 60Hz
 9999
(same as the power supply voltage)
CA
(terminal CA equipped model) 		Terminal CA: analog current output (0 to 20mADC)
Terminal AM: analog voltage output (0 to ±10VDC) 		ON Source logic 50Hz 8888
(95% of the power supply voltage)

Plug-in option for SSI communication

FR-A8APS-02

Distance meters other than those specified on page 6 with SSI interface can be used when the following requirements are met.

Specification Requirement
Distance meter type Laser/barcode/encoder
Data rate 0.1MHz/0.2MHz/1.0MHz
Data code format Binary data / gray code
Effective data length 8 to 46 bits
Resolution (encoder) 4096