Press Releases

Mitsubishi Electric Automation Introduces Gigabit Ethernet-based RD77GF Simple Motion Modules & MR-J4-GF-RJ Servo Drives

Mitsubishi Electric Automation Introduces Gigabit Ethernet-based RD77GF Simple Motion Modules & MR-J4-GF-RJ Servo Drives

July 11, 2016
Addressing the need for integrating motion control, safety, I/O, variable frequency drives, and robots on a single open network with gigabit speeds, Mitsubishi Electric Automation, Inc. introduces the new RD77GF Simple Motion Modules and MR-J4-GF-RJ Servo Drives featuring an open CC-Link IE Field interface.
Read More

Mitsubishi Electric Automation Introduces Multi-Network Servo Drives

Mitsubishi Electric Automation Introduces Multi-Network Servo Drives

July 11, 2016
Mitsubishi Electric Automation, Inc. introduces the MR-J4-TM multi-network servo drives with EtherNet/IP™ and EtherCAT® interfaces. A PROFINET® interface will be available later this year.
Read More

Mitsubishi Electric

Mitsubishi Electric Automation traslada hacia Querétaro sus Operaciones de Servicio y Soporte Técnico en México

July 08, 2016
Con la finalidad de brindar una mejor atención al sector manufacturero de México, especialmente la región del Bajío en el centro norte de México, Mitsubishi Electric Automation, Inc., ha reubicado sus operaciones de Servicio y Soporte Técnico de Controles Numéricos Computarizados (CNC), Robots y Variadores de Frecuencia a la ubicación más centralizada de El Marqués, Querétaro, México.
Leer más

Mitsubishi Electric

Mitsubishi Electric Automation Moves Mexico Service and Support Operations to Querétaro

July 08, 2016
In an effort to better serve the manufacturing sector in Mexico, and in particular, the Bajio region of North-Central Mexico, Mitsubishi Electric Automation, Inc. has relocated its service and support operations for computer numerical controls (CNC), robots, and variable frequency drives (VFD) to the more centralized location of El Marqués, Querétaro, Mexico.
Read More

Mitsubishi Electric Automation to Exhibit CNC Controls and Enterprise Connectivity Solutions at IMTS in Chicago

Mitsubishi Electric Automation to Exhibit CNC Controls and Enterprise Connectivity Solutions at IMTS in Chicago

July 05, 2016
Mitsubishi Electric Automation, Inc. will exhibit its new M8 Series CNC controls and e-F@ctory enterprise connectivity solution for the Industrial Internet of Things (IIoT) at the Industrial Automation North America show.
Read More

Mitsubishi Electric

IIC Approves Factory Automation Platform as a Service (FA PaaS) Testbed Proposed by Mitsubishi Electric, Hitachi and Intel

June 30, 2016
Mitsubishi Electric Corporation announced today that a factory automation platform as a service (FA PaaS) testbed, which is under joint development by Mitsubishi Electric, Hitachi, Ltd. and Intel Corporation, has been approved by the Industrial Internet Consortium (IIC) in the United States.
Read More

Mitsubishi Electric Automation Introduces Large Capacity 6-Axis Robots

Mitsubishi Electric Automation Introduces Large Capacity 6-Axis Robots

May 18, 2016
Addressing the need for higher capacity robots to meet the demands of today’s advanced automated manufacturing processes, Mitsubishi Electric Automation, Inc. introduces the latest in its line of RV-F Series 6-axis robots in 35, 50 and 70 kg payloads.
Read More

CC-Link Partner Association (CLPA) Opens Office in Mexico

CC-Link Partner Association (CLPA) Opens Office in Mexico

April 14, 2016
Responding to demand by Mexican manufacturers for local CC-Link service, training and support, the CC-Link Partner Association (CLPA) announced today that it has opened a branch office in Mexico City. Industrial automation users of CC-Link technology in Mexico had previously traveled to the U.S. for training. This move strengthens CC-Link’s position as a leading global open automation network technology and expands the CLPA’s global reach. CLPA’s other offices are located in the U.S., China, Germany, Japan, Singapore, South Korea, Taiwan, India, Turkey, and the United Kingdom.
Read More

Mitsubishi Electric Automation Launches Integrated Control Platform

Mitsubishi Electric Automation Launches Integrated Control Platform

January 28, 2016
Responding to industry demand for integrated machine and plant control, Mitsubishi Electric Automation, Inc. announces the introduction of the iQ-R Series which incorporates sequence, motion, safety, process, and C language control into one platform.
Read More

The CC-Link Partner Association proves it is here to stay as it marks its 15th Anniversary

The CC-Link Partner Association proves it is here to stay as it marks its 15th Anniversary

January 22, 2016
January is a significant milestone for the CC-Link Partner Association (CLPA) in the Americas, as it marks exactly 15 years since the founding of the organization and the birth of the family of CC-Link open automation network technologies. In these 15 years they have gone from dominating the Japanese market to becoming accepted global technologies.
Read More

CLPA and PI to Cooperate for a Transparent Network Infrastructure

CLPA and PI to Cooperate for a Transparent Network Infrastructure

December 01, 2015
The CC-Link Partner Association (CLPA) and PI (PROFIBUS & PROFINET International) are announcing a close collaboration with the objective of promoting and disseminating the use of open industrial networks. As users aspire to be ready for Industry 4.0 or the Industrial Internet of Things based manufacturing systems easy integration of various networks, such as CC-Link IE and PROFINET, is essential for this.
Read More

Introducing the M800 & M80 Series CNC: M800 Series boasts industry’s fastest CNC

Introducing the M800 & M80 Series CNC: M800 Series boasts industry’s fastest CNC

October 01, 2015
Addressing the need for a fast, precise and affordable computerized numerical control (CNC) system for complex machining applications, Mitsubishi Electric Automation, Inc. introduces the M800 and M80 Series CNC and components.
Read More

CC-Link Partner Association Welcomes Cisco to Board of Directors

CC-Link Partner Association Welcomes Cisco to Board of Directors

August 10, 2015
The Nagoya, Japan-based CC-Link Partner Association (CLPA), whose objective is to promote the widespread use of the Ethernet-based industrial open network CC-Link IE, has announced that Cisco Systems, Inc. (NASDAQ: CSCO) will join the CLPA as a new board member. The two organizations will collaborate on promoting solutions based on CC-Link IE.
Read More

Mitsubishi Electric Automation Introduces Energy-Saving Variable Frequency Drive - F800 Series designed to efficiently move air in HVAC applications

Mitsubishi Electric Automation Introduces Energy-Saving Variable Frequency Drive - F800 Series designed to efficiently move air in HVAC applications

August 10, 2015
Mitsubishi Electric Automation, Inc. introduces the F800 Series variable frequency drive (VFD) for precise motor speed control with maximum energy-savings. The low-voltage F800 is specifically designed to improve efficiency of air movement through HVAC systems.
Read More

Mitsubishi Electric Automation Takes VFD Technology into 600-Volt Regions - A860 Series Inverter Delivers Class-Leading Technology to New Markets

Mitsubishi Electric Automation Takes VFD Technology into 600-Volt Regions - A860 Series Inverter Delivers Class-Leading Technology to New Markets

July 29, 2015
Engineering and plant managers in regions where the main power supply is 575-600 volts can now harness the performance benefits of Mitsubishi Electric’s inverter technology with the introduction of the A860 Series variable frequency drive (VFD). A 600-volt version of the proven A800 Series all-in-one VFD, the new A860 Series inverter combines traditional induction and permanent magnet motors into a single solution.
Read More

Mitsubishi Electric Automation Adds Option Card and Programming Software to 800 Series VFDs

Mitsubishi Electric Automation Adds Option Card and Programming Software to 800 Series VFDs

July 29, 2015
Mitsubishi Electric Automation, Inc. introduces the FR-Configurator2, a new generation of variable frequency drive (VFD) programming software, plus plug-in type option cards and stand-alone accessories for its FR-A800 and FR-F800 series inverters. These additions are designed to provide flexibility in order to maximize the inverters’ performance and application efficiency.
Read More

New Controller from Mitsubishi Electric Automation Provides Advanced Functionality in Compact, Cost-Effective Design

New Controller from Mitsubishi Electric Automation Provides Advanced Functionality in Compact, Cost-Effective Design

April 21, 2015
Automation professionals looking for a powerful controller in a compact, affordable design can now turn to the iQ-F Series Compact Controller from Mitsubishi Electric Automation, Inc. The iQ-F Series is based on Mitsubishi Electric’s popular and well-established FX Series. Delivering the same control capabilities as its predecessor, the new compact controller incorporates new functionalities for even better performance and user experience.
Read More

Mitsubishi Electric Automation Introduces Low-Voltage Variable Frequency Drive

Mitsubishi Electric Automation Introduces Low-Voltage Variable Frequency Drive

January 26, 2015
Responding to demand within the HVAC market for a drive that can improve efficiency of air movement through HVAC systems, Mitsubishi Electric Automation, Inc. introduces the F800 Series variable frequency drive (VFD). The low-voltage F800 is specifically designed and optimized for HVAC applications, including air handlers, cooling towers, and pumps.
Read More

CC-Link Partner Association Welcomes Molex® to Board of Directors

CC-Link Partner Association Welcomes Molex® to Board of Directors

December 17, 2014
Continuing to strengthen CC-Link’s position as a leading global open automation network technology, the CC-Link Partner Association (CLPA) announced today that Molex, a global manufacturer of automation and industrial products, joined the association as a board member. The board of directors is responsible for the management and strategy of the CLPA.
Read More

Mitsubishi Electric’s e-F@ctory IoT Gateway Provides Real-time, Cloud-Based Energy Utilization Information

Mitsubishi Electric’s e-F@ctory IoT Gateway Provides Real-time, Cloud-Based Energy Utilization Information

December 16, 2014
Mitsubishi Electric Automation, Inc. and ILS Technology, a Telit company, today announced that they have collaborated on the e-F@ctory IoT Gateway, Mitsubishi Electric’s new Machine-to-Cloud (M2C) industrial appliance for Internet of Things (IoT) applications.
Read More

Mitsubishi Electric Automation announces Secomea as newest member of its e-F@ctory Alliance Program

Mitsubishi Electric Automation announces Secomea as newest member of its e-F@ctory Alliance Program

November 17, 2014
Mitsubishi Electric Automation, Inc. now offers easy and secure remote access for programming, monitoring and logging data into its automation products by welcoming Secomea to its e-F@ctory Alliance Program.
Read More

Mitsubishi Electric Automation Announces Release of MC Works64™

Mitsubishi Electric Automation Announces Release of MC Works64™

October 22, 2014
Addressing the growing customer demand for engaging, three-dimensional graphic visualization of business processes, Mitsubishi Electric Automation, Inc., announces the release of MC Works64, a PC-based supervisory control and data acquisition software suite that improves the visibility of manufacturing operations.
Read More

Mitsubishi Electric's MELFA-3D Vision & Sensor-less Servo Win R&D 100 Awards

Mitsubishi Electric's MELFA-3D Vision & Sensor-less Servo Win R&D 100 Awards

August 06, 2014
Mitsubishi Electric's MELFA-3D Vision and Sensor-less Servo, have each won a 2014 R&D 100 Award from R&D Magazine. The awards, commonly known as the “Oscars of Innovation,” underline Mitsubishi Electric’s continuing status as a global leader in industrial innovation.
Read More

Mitsubishi Electric Automation Introduces Low-Cost, High-Functionality Servo System

Mitsubishi Electric Automation Introduces Low-Cost, High-Functionality Servo System

July 30, 2014
Because of its auto-tuning function, the MR-JE is especially suited to applications that require precise control of servomotors, such as packaging, labeling and machine tool applications. It’s ideal for use in pick and place machines.
Read More

Mitsubishi Electric Automation Enters Decentralized Drive Market With the PowerGate 66

Mitsubishi Electric Automation Enters Decentralized Drive Market With the PowerGate 66

July 16, 2014
The PowerGate 66 drive is especially suitable for applications that require precise motor speed control, including conveyors used in food and beverage operations and material handling, and the control of pumps and fans in HVAC and water handling applications, or in any application where the drive is exposed to water and dust.
Read More

Mitsubishi Electric Automation Introduces Graphic Operation Terminal with Touchscreen Capability

Mitsubishi Electric Automation Introduces Graphic Operation Terminal with Touchscreen Capability

July 09, 2014
GOT2000 Series, a human machine interface (HMI) that monitors and controls machine components with a graphical touchscreen. This unique technology allows operators to interact with the HMI similarly to a tablet or smartphone with intuitive gestures and multi-touch actions.
Read More

Mitsubishi Electric Automation Introduces All-in-One Motor Controller to Improve Motor Protection and Increase Wire Efficiency

Mitsubishi Electric Automation Introduces All-in-One Motor Controller to Improve Motor Protection and Increase Wire Efficiency

May 14, 2014
MMP-T32 integrates low voltage circuit breaker and thermal overload relay functions. This device is capable of protecting the motor branch circuits from overload, phase-loss and short-circuit occurrences. The MMP-T32 enables more secure wiring and motor protection than standard open type starters. In addition to motor protection, integrating the Mitsubishi MS-T Series contactor provides a smaller footprint, and the combination motor controller will help eliminate wiring and save time in panel design.
Read More

Mitsubishi Electric Automation Introduces All-in-One A800 Variable Frequency Drive

Mitsubishi Electric Automation Introduces All-in-One A800 Variable Frequency Drive

April 30, 2014
In response to industry demand for a drive that is fast, dependable, easy to use, and easy to integrate and install, Mitsubishi Electric Automation, Inc., announces the release of the A800 Series all-in-one variable frequency drive (VFD). The A800 Series inverter combines traditional induction and permanent magnet motors into a single solution, providing high performance response and energy-efficient motor control.
Read More

Mitsubishi Electric Automation Launches Integrated Automation Control Solutions Website

Mitsubishi Electric Automation Launches Integrated Automation Control Solutions Website

April 23, 2014
Mitsubishi Electric Automation introduces a website exclusively for engineering managers, plant managers and others who specify control systems. The new site is designed as a one-stop online destination for integrated automation control solutions used in basic to highly integrated or advanced applications.
Read More

Mitsubishi Electric Automation Adds MDT Software to its e-F@ctory Alliance Program

Mitsubishi Electric Automation Adds MDT Software to its e-F@ctory Alliance Program

April 16, 2014
Mitsubishi Electric Automation, Inc. announced that it has selected MDT Software, a world leader in change management solutions for automated manufacturing assets, to join its e-F@ctory Alliance Program.
Read More

Mitsubishi Electric

Mitsubishi Electric Automation Opens Certified Training Center in Norwood, Mass. for Automation Customers in the Northeast U.S.

April 09, 2014
In an effort to make training convenient for its customers throughout North America, Mitsubishi Electric Automation has opened a Certified Training Center at Gibson Engineering in Norwood, Mass. The training center gives customers in the Northeastern U.S. more convenient access to the same quality training, hardware and material that was previously available to them only at Mitsubishi Electric Automation headquarters near Chicago, Ill.
Read More

eWON Joins Mitsubishi Electric Automation's e-F@ctory Alliance Program

eWON Joins Mitsubishi Electric Automation's e-F@ctory Alliance Program

February 26, 2014
eWON, which offers industrial VPN routers and Ethernet modems for remote access to PLCs and machines, is the newest member of the Mitsubishi Electric Automation e-F@ctory Alliance Program.
Read More

Mitsubishi Electric Automation releases new MS-T Series contactors

Mitsubishi Electric Automation releases new MS-T Series contactors

February 24, 2014
Responding to industry demand for a smaller footprint and cost savings in motor control applications, Mitsubishi Electric Automation, Inc., announces the release of MS-T Series contactors and motor control products ranging from 10 to 32 amps.
Read More

Mitsubishi Electric Automation Launches Energy Website for Manufacturers

Mitsubishi Electric Automation Launches Energy Website for Manufacturers

February 12, 2014
Mitsubishi Electric Automation has launched a website to address the energy challenges faced by the manufacturing sector. The new site is a dedicated resource that provides tools, white papers, and energy reduction solutions for a variety of industries, including automotive, food and beverage, logistics, material handling, packaging, metal, cement, glass, chemical, paper, data centers, warehouses and other manufacturing or commercial facilities.
Read More

Introducing the e-F@ctory Alliance Program

Introducing the e-F@ctory Alliance Program

January 29, 2014
In a continuing effort to help its customers increase productivity and reduce total cost of ownership within industrial plants and manufacturing facilities, Mitsubishi Electric Automation, Inc. introduces the e-F@ctory Alliance Program.
Read More

Mitsubishi Electric

Mitsubishi Electric Automation Introduces Retrofit Package to Replace MELDASMAGIC®64 Controls

November 20, 2013
Some machine tool builders (MTBs) are unable to support their control systems due to such factors as obsolete parts, which can leave machine shops looking for alternative solutions to keep the systems running, or else requiring them to scrap the machines altogether.
Read More

Mitsubishi Electric Automation's Web-based Energy Data Collection Solution Simplifies Energy Management in Industrial Plants and other Commercial Facilities

Mitsubishi Electric Automation's Web-based Energy Data Collection Solution Simplifies Energy Management in Industrial Plants and other Commercial Facilities

November 06, 2013
With energy prices on the rise, there's an increasing need to monitor and manage energy use in industrial plants and other commercial facilities. However, integrating hardware and software systems is both challenging and time consuming. Mitsubishi Electric Automation, Inc. now makes it simple with the introduction of EcoWebServer III, a web-based energy data management solution.
Read More

Mitsubishi Electric Factory Automation Products Installed at Université du Québec à Trois-Rivières

Mitsubishi Electric Factory Automation Products Installed at Université du Québec à Trois-Rivières

October 30, 2013
With a long-standing reputation for delivering innovative factory automation products and solutions, along with a fervent commitment to continuing education, Mitsubishi Electric Automation, Inc., extends its skills development initiatives to the university-level classroom.
Read More

Mitsubishi Electric Expands WSS Series Circuit Breakers

Mitsubishi Electric Expands WSS Series Circuit Breakers

October 16, 2013
Mitsubishi Electric Automation, Inc., announced the expansion of its WSS Series circuit breakers, as well as the phasing out of older models.
Read More

Mitsubishi Electric Announces CNC Data Backup in the Cloud

Mitsubishi Electric Announces CNC Data Backup in the Cloud

October 09, 2013
Most factories discover too late that they don't have a backup of their CNC machine tool information.  To help avoid such a scenario and minimize downtime, Mitsubishi Electric Automation, Inc., will now offer its customers remote access to a backup of their CNC machine tool information.
Read More

Mitsubishi Electric to Exhibit Productivity-Boosting Solutions for Packaging and Processing Manufacturers at PACK EXPO in Las Vegas

Mitsubishi Electric to Exhibit Productivity-Boosting Solutions for Packaging and Processing Manufacturers at PACK EXPO in Las Vegas

September 18, 2013
Competitive pressures in factory automation demand higher productivity at lower costs. To help meet these demands, Mitsubishi Electric Automation, Inc., offers a suite of products designed to boost productivity on the plant floor.
Read More

Mitsubishi Electric Automation to Exhibit Real-Time, Manufacturing Visibility and Efficiency Solutions at PACK EXPO in Las Vegas

Mitsubishi Electric Automation to Exhibit Real-Time, Manufacturing Visibility and Efficiency Solutions at PACK EXPO in Las Vegas

September 12, 2013
Mitsubishi Electric Automation, Inc., will exhibit MES Interface IT and MC Works® -- two solutions that combine to provide manufacturers with the ability to visualize and direct real-time productivity and efficiency within their facilities -- at PACK EXPO in Las Vegas.
Read More

Mitsubishi Electric Offers New Warranty Options on Comprehensive Line of Robots

Mitsubishi Electric Offers New Warranty Options on Comprehensive Line of Robots

September 10, 2013
Mitsubishi Electric's high-quality, precise robots have been solving manufacturing challenges since 1980. Now, in a vote of confidence in the quality and reliability of its comprehensive line of compact, powerful robots, Mitsubishi Electric Automation, Inc., will offer several new warranty options.
Read More

Mitsubishi Electric Automation to Exhibit Energy Solutions at PACK EXPO in Las Vegas

Mitsubishi Electric Automation to Exhibit Energy Solutions at PACK EXPO in Las Vegas

September 04, 2013
Mitsubishi Electric Automation, Inc., will exhibit its energy monitoring and management products and solutions at PACK EXPO, a packaging and processing trade show being held in Las Vegas, September 23-25.
Read More

Mitsubishi Electric Expands MELSEC-L Series Programmable Controller Lineup

Mitsubishi Electric Expands MELSEC-L Series Programmable Controller Lineup

August 21, 2013
With the addition of new controllers, network, power supply, and I/O modules to its MELSEC-L Series lineup, Mitsubishi Electric Automation, Inc., continues to deliver innovative technology that provides better cost performance and faster return on investment.
Read More

Mitsubishi Electric Adds Entry-Level Micro PLC to FX3 Series

Mitsubishi Electric Adds Entry-Level Micro PLC to FX3 Series

August 14, 2013
Addressing the demand for high performance programmable logic control in the price-sensitive factory automation market, Mitsubishi Electric Automation, Inc., introduces the FX3S Programmable Logic Controller.
Read More

Mitsubishi Electric Automation and Powerit Solutions Join Forces to Bring Demand Management to Industrial Facilities

Mitsubishi Electric Automation and Powerit Solutions Join Forces to Bring Demand Management to Industrial Facilities

August 08, 2013
Mitsubishi Electric Automation, Inc., has joined with Powerit Solutions to help industrial businesses reduce electricity costs and meet corporate sustainability goals.
Read More

Mitsubishi Electric Introduces All-in-One Micro Programmable Logic Controller

Mitsubishi Electric Introduces All-in-One Micro Programmable Logic Controller

July 24, 2013
Mitsubishi Electric Automation, Inc., has embedded two of the most commonly used expansion functions for micro programmable logic controllers - Ethernet communications and analog I/O - into its new FX3GE Programmable Logic Controller (PLC).
Read More

Mitsubishi Electric Releases Q170MCPU-EIP Motion Controller

Mitsubishi Electric Releases Q170MCPU-EIP Motion Controller

July 17, 2013
Continuing its momentum as a factory automation technology innovator, Mitsubishi Electric Automation, Inc. releases the Q170MCPU-EIP motion controller.
Read More

Mitsubishi Electric Launches M7V Series CNC Platform with Faster Cycle Times, Increased Production Output

Mitsubishi Electric Launches M7V Series CNC Platform with Faster Cycle Times, Increased Production Output

July 10, 2013
As an innovator of factory automation technology, Mitsubishi Electric Automation, Inc., continues to meet market demand for higher production output rates with the introduction of the M70V Series computer numerical controllers (CNC).
Read More

Mitsubishi Electric Certifies Training Center at Bertelkamp Automation in Knoxville, Tenn.

Mitsubishi Electric Certifies Training Center at Bertelkamp Automation in Knoxville, Tenn.

June 26, 2013
Mitsubishi Electric Automation has authorized Bertelkamp Automation, Inc., Knoxville, Tenn., as a Mitsubishi Electric Certified Training Center (CTC).
Read More

Mitsubishi Electric Automation Offers Solution to Costly CNC Equipment Repairs

Mitsubishi Electric Automation Offers Solution to Costly CNC Equipment Repairs

June 18, 2013
Mitsubishi Electric Automation reminds companies to take advantage of scheduled factory shutdowns during the upcoming July 4th weekend to perform proactive maintenance on CNC equipment.
Read More

Mitsubishi Electric Automation Launches New Web Site Illustrating Effect of Its Innovative Automation Solutions on Everyday Life

Mitsubishi Electric Automation Launches New Web Site Illustrating Effect of Its Innovative Automation Solutions on Everyday Life

May 15, 2013
Mitsubishi Electric Automation, Inc. has launched a web site to give automation professionals easy access to information about its comprehensive industrial automation solutions.
Read More

Mitsubishi Electric Automation Launches Process Industry-Specific Web Site

Mitsubishi Electric Automation Launches Process Industry-Specific Web Site

May 08, 2013
Mitsubishi Electric Automation, Inc. has launched a web site to provide solutions specifically for the oil and gas, water and wastewater, and power generation industries.
Read More

New Mitsubishi Electric Automation F-Series Robots Facilitate Highly Dexterous, Complex Operations Typically Performed by Human Operators

New Mitsubishi Electric Automation F-Series Robots Facilitate Highly Dexterous, Complex Operations Typically Performed by Human Operators

March 05, 2013
Factories and production plants are under increasing pressure to reduce costs and improve productivity, while at the same time, assembly and processing tasks are becoming more complex. Responding to these demands, Mitsubishi Electric Automation, Inc. has introduced the F-series industrial robots, the latest of its high performance robots, designed for extremely dexterous, complex operations.
Read More